Quick Guide to Update Wavlink AC1200 Extender Firmware



Although Wavlink AC1200 range extender is an outperforming device, its performance becomes poor when it requires a firmware update. For your knowledge, firmware is a software embedded in the hardware of your Wavlink device that controls its overall activity. It means whenever the company rolls out a new firmware version for the extender, you have to install it to keep the extender’s performance at its peak. But, do you know how to update your Wavlink AC1200 extender’s firmware? No? Then, walk through this post and learn the steps to do extender firmware update via the Wavlink setup wizard.


How to Update Wavlink AC1200 Firmware?


  • Connect Your Extender and Router

To begin with, create a wired connection between your Wavlink AC1200 extender and the main router with the help of an Ethernet cable. However, avoid using a damaged Ethernet cable and remember the golden rule of establishing a finger-tight Ethernet connection.

Just in case you don’t like wires, you can also take the aid of a wireless source to connect your devices. The only thing you need to ensure is that your WiFi devices are neither placed adjacent to each other nor too far. It is because too less distance can result in a clash of WiFi signals whereas your devices won’t be able to communicate properly if the distance is too much.


  • Open a Web Browser

The moment you are done establishing the extender-router connection, switch on your computer. In case you don’t have a computer, consider using a laptop. However, the device you are using to update the Wavlink AC1200 firmware must be free of viruses.

Is your computer or laptop ready for use now? Good! So, load your favorite internet browser. But, your favorite internet browser is supposed to fulfill two requirements. First of all, it must be updated, and secondly, it shouldn’t carry cache, cookies, and browsing history.


  • Download the Firmware File

The next step in line is to download the firmware file of the Wavlink AC1200 extender. So, consider downloading the firmware file for your Wavlink device and saving it at the most convenient location on the PC.

It is advised not to download the firmware file of another Wavlink extender model. Know that uploading the wrong firmware file can prevent you from updating your Wavlink AC1200 firmware.


  • Access the Wavlink Login Page

Right after downloading the firmware file, you need to access the ap.setup Wavlink login page. So, consider opening up a new tab on the web browser. Once done, locate the address bar and enter the default web address of your Wavlink AC1200 range extender into it.

The web address of the extender must be entered carefully. Additionally, avoid using the search bar of the web browser to access it. However, do not forget to press the Enter key after entering the web address. Doing so will open up the Wavlink login page for you.

  • Log in to Your Wavlink AC1200

On the login page of the Wavlink AC1200 extender, you will be prompted to enter the default password. So, enter the same into its designated field and complete other requirements.

Cross-check the default password entree. Now, click the Login button. In case you have changed the default password of your range extender, make sure you use the updated one.

  • Upload the Firmware File

Clicking the Login button will take you to the dashboard of the Wavlink AC1200 extender. Here, locate the Setup tab and click it. Thereafter, select the Upgrade Firmware option.

Now, the Upgrade Firmware window will come into view. Click the Select File button and locate the firmware file you downloaded. Lastly, click Apply and let the firmware update process get completed.


The Bottom Line

That’s all about how to update the extender’s firmware by accessing the Wavlink AC1200 setup wizard. Signing off with the hope that the instructions mentioned above will help you update your device and add new features to it.


أحدث أقدم